Plastics and compounds

Down

You are here:

verschieden farbiges Granulat aus Polymer und Masterbatches

OMPG's range of services in the field of processing and testing plastics and compounds is very comprehensive. We have the technology to polymerize PA and PET or to extrude all common plastics with the option of incorporating additives, fillers and liquid additives. The granulates produced or supplied can be converted into various test specimen shapes (tension rod, sheet, film) using injection molding technology and tested in accordance with the relevant standards.

Our services

Show test standards

Here you will find a list of all test standards for which we offer services in this area. All currently accredited standards can be found on the Accreditation page in our list of services.

Show test standards for Plastics and compounds

Contact

Plastics processing and testing

Dipl.-Ing. Ute Schwarz

Phone: + 49 3672 379 - 420

Email: kunststoffpruefung@ompg.de

Composite production and testing

Dipl.-Ing. Christian Hauspurg

Phone: + 49 3672 379 - 341

Email: prueflabor@ompg.de

Chemical analytics

Dr. Anke Krämer

Phone: + 49 3672 379 - 256

Email: analytik@ompg.de

Search

Find test standards

You can search directly for specific standards using our range search or enter your keyword in the full text search.

Phone	+ 49 3672 379 - 0
E-Mail	info@ompg.de

BVL B 82.10-1	Analysis of commodity goods – Testing of coloured children's toys with respect to their resistance to saliva and perspiration
DIN 5033-1	Colorimetry – Part 1: Basic terms of colorimetry
DIN 53236	Colouring materials – Conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
DIN 53497	Testing of plastics – Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
DIN 53840-1	Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density of up to 500 dtex
DIN 53840-2	Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density exceeding 500 dtex
DIN 53866-2	Testing of textiles; shrinkage of single and plied yarns, determination of shrinkage in water
DIN 53866-3	Testing of textiles; shrinkage behavior of single yarns and twisted yarns, determination of shrinkage in hot air
DIN 54005	Testing of colour fastness of textiles; determination of colour fastness of dyeings and prints to water (mild)
DIN 54015	Testing of colour fastness of textiles – Determination of colour fastness of dyeings and prints to washing in presence of peroxide
DIN 54016	Testing of colour fastness of textiles – Determination of colour fastness of dyeings and prints to washing in presence of hypochlorite
DIN 54034	Testing of colour fastness of textiles – Determination of colour fastness of dyeings and prints to bleaching: Hypochlorite (mild)
DIN 6174	Colorimetric evaluation of colour coordinates and colour differences according to the approximately uniform CIELAB colour space
DIN 67530	Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics
DIN 75201	Determination of the fogging characteristics of trim materials in the interior of automobiles
DIN 75220	Ageing of automotive components in solar simulation units
DIN EN 1465	Adhesives – Determination of tensile lap-shear strength of bonded assemblies
DIN EN 20105-B06	Tests for colour fastness – Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN 20105-C01	Textiles; tests for colour fastness; part C01: colour fastness to washing; test 1
DIN EN 20105-C02	Textiles; tests for colour fastness; part C02: colour fastness to washing; test
DIN EN 20105-C03	Textiles; tests for colour fastness; part C03: colour fastness to washing; test 3
DIN EN 20105-C04	Textiles; tests for colour fastness; part C04: colour fastness to washing; test 4
DIN EN 20105-C05	Textiles; tests for colour fastness; part C05: colour fastness to washing; test 5
DIN EN 20105-C10	Textiles – Tests for colour fastness – Part C10: Colour fastness to washing with soap or with soap and soda
DIN EN 2563	Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates; determination of apparent interlaminar shear strength
DIN EN ISO 105-B05	Textiles – Tests for colour fastness – Part B05: Detection and assessment of photochromism
DIN EN ISO 105-B06	Textiles – Tests for colour fastness – Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
DIN EN ISO 105-C01	Textiles; tests for colour fastness; part C01: colour fastness to washing: test 1
DIN EN ISO 105-C02	Textiles; Tests for colour fastness; part C02: colour fastness to washing: test 2
DIN EN ISO 105-C03	Textiles; tests for colour fastness; part C03: colour fastness to washing: test 3
DIN EN ISO 105-C04	Textiles – Tests for colour fastness – Part C12: Colour fastness to industrial laundering
DIN EN ISO 105-C05	Textiles; tests for colour fastness; part C05: colour fastness to washing; test 5
DIN EN ISO 105-C10	Textiles – Tests for colour fastness – Part C10: Colour fastness to washing with soap or with soap and soda
DIN EN ISO 105-D01	Textiles – Tests for colour fastness – Part D01: Colour fastness to dry cleaning using perchloroethylene solvent
DIN EN ISO 105-P01	Textiles – Tests for colour fastness – Part P01: Colour fastness to dry heat (excluding pressing)
DIN EN ISO 10618	Carbon fibre – Determination of tensile properties of resin-impregnated yarn
DIN EN ISO 1172	Textile-glass-reinforced plastics – Prepregs, moulding compounds and laminates – Determination of the textile-glass and mineral-filler content using calcination methods (Method A: Determination of textile glass content)
DIN EN ISO 14125	Fiber-reinforced plastics – Determination of flexural properties
DIN EN ISO 178	Plastics – Determination of flexural properties
DIN EN ISO 179-1	Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact test
DIN EN ISO 180	Plastics – Determination of Izod impact strength
DIN EN ISO 3451-1	Plastics – Determination of ash – Part 1: General methods (Method A: Direct annealing)
DIN EN ISO 4892-2	Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps
DIN EN ISO 527-1	Plastics – Determination of tensile properties – Part 1: General principles
DIN EN ISO 527-2	Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics
DIN EN ISO 527-3	Plastics – Determination of tensile properties – Part 3: Test conditions for films and sheets
DIN EN ISO 527-4	Plastics – Determination of tensile properties – Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
DIN EN ISO 604	Plastics – Determination of compressive properties
DIN EN ISO 6603-2	Plastics – Determination of puncture impact behaviour of rigid plastics – Part 2: Instrumented impact testing
DIN EN ISO 6721-2	Plastics – Determination of dynamic mechanical properties – Part 2: Torsional pendulum method
DIN EN ISO 8256	Plastics – Determination of tensile-impact strength
GMW 3235	Fogging Characteristics of Trim Materials
ISO 22314	Plastics – Glass-fibre-reinforced products – Determination of fibre length
SAE J 1756	Fogging Characteristics of Interior Automotive Materials
VDA 75202	Automotive interior materials – Colour fastness test and aging behavior to light at high temperatures – Xenon arc light (withdrawn standard) (sun simulation)
VOLVO STD 420-0003	Fogging – Organic Materials
VW PV 3015	Non-metallic interior materials – Determination of condensable components (Fogging G)

VW approval for complete range of emission tests

Visit us at Fakuma!

Funding for consulting and process support

Plastics and compounds

Our services

Show test standards

Contact

Search

Find test standards

More about materials

Textiles and fibers

Composites

Elastomers and rubber

Films

Leather

Foams

Wood-based materials